S3 UnGlu'd – Universal Adhesive & Mastic Remover

Description

UnGlu'd is an advanced, patent-pending chemical de-bonding technology effective in the removal of pressure-sensitive adhesives (PSAs) and other flooring mastics, glues, and adhesives (both water-based and non-water-based). UnGlu'd is non-toxic and fully biodegradable. This fast-acting formula eliminates the need for time-consuming mechanical or abrasive removal, as well as the use of toxic chemicals.

Features & Benefits

Effective in removing PSAs, flooring mastics, glues, and adhesives

Safer alternative for removal and containment of asbestos-based mastics

Fast-acting — 2-hour dwell time is typical

Non-toxic and non-caustic

Fully biodegradable

Non-flammable

Low odor, no HAPS, and no TAPS — does not require forced ventilation

Improves project site health and safety

Non-corrosive to tools

Applications

Concrete

Wood

Cement-based materials

Other unpainted substrates

Product Details

Property	Specification
Packaging	4-gallon kits
Color	Purple
Shelf Life	12 months in unopened containers
Pot Life @ 73°F	Mixed material reusable if sealed tightly in pail
Dwell Time	2 hours minimum to overnight
Application Temperature	55–95°F
VOC Content	<0 g/L
Coverage	100 SF/gallon (dependent on surface roughness)

Surface Preparation

All finished flooring must be completely removed so that the target PSA / mastic / glue is totally exposed. There should be no pooled water or other liquid on the surface prior to the application of UnGlu'd. Remove other loose foreign materials prior to application. Before applying, protect all areas that won't be treated.

Mixing & Application

Open pail and pre-mix with drill and paddle mixer for 30 seconds. Ensure it is thoroughly and homogeneously mixed. DO NOT UNDER MIX. DO NOT DILUTE.

Apply to the target area using a nap-roller, brush, or other spreading technique. The goal is to apply a heavy and uniform coat to completely encapsulate the surface of the target floor.

Apply at a rate of 80–100 SF/gallon (full mixed kit includes 4 gallons) depending on surface roughness.

Once applied, protect the target area from interference from equipment traffic, walk-on traffic, rain, etc.

Any unused mixed UnGlu'd can be re-sealed for future use but must be stored with lid completely sealed.

Tip: If you walk away from the application for more than 1 hour, remix the material for 30 seconds before reapplying.

Dwell Time

Once properly applied, allow UnGlu'd to dwell on the surface for a minimum of 2 hours, and up to 12 hours (overnight). UnGlu'd will still be "wet" after 2 hours; however, with longer dwell times (such as overnight), the product will dry out and may alter how the underlying PSA or mastic scrapes off the substrate.

Dwell Time Factors

Dwell time increases in colder temperatures (ambient and substrate)

May vary based on the type of material being removed

Always perform a test patch to determine adequate dwell time

DO NOT agitate or interfere with the surface once product has been applied

Test Patch: Test the area after 2 hours to see if dwell time is sufficient for easy removal. Allow to dwell longer if adhesive does not easily scrape from the surface.

Removal

After sufficient dwell time and confirmation from the test patch, use a sharp, long-handled razor floor scraper to remove the target adhesive. If dwell time was sufficient, adhesives should be easy to scrape off and remove. Ensuring the scraper gets "under" the base PSA/glue/mastic when beginning to scrape will allow for easier removal, as the materials should "peel" off the underlying substrate.

Wet Scraping vs. Dry Scraping

UnGlu'd is specially formulated to work effectively in as little as 2 hours. When removing within this dwell time, the product will still be "wet." Wet scraping will result in wet waste and is ideal for short project time frames, as well as for projects where asbestos-based mastics are suspected.

Post-Removal Cleaning: When a coating/epoxy, paint, or new floor is to be installed, the surface residue must be cleaned. Residue can be easily removed with water, a black pad buffer, or auto scrubber. All water and residue should be vacuumed up. If a CSP profile is required, use S3 Surface Prep EXT to provide profile and porosity.

Disposal

Collect all solid waste (both wet and dry) and dispose of according to local waste regulations. When removing asbestos-containing materials, always comply with local regulations and use extra caution in removal and disposal. UnGlu'd is non-toxic and fully biodegradable but always use standard chemical handling safety and precautions.

Clean Up

Tools and surfaces can be cleaned with water. Dispose of excess material in accordance with local, state, and federal regulations.

Storage

UnGlu'd must be stored in tightly sealed containers, between temperatures 50–80°F. Do not allow to freeze.

Safety Precautions

As with all chemicals, good hygienic habits must be observed, and the wearing of protective clothing and gloves is advised. Before using any S3 Surface Solutions, LLC product, please read and follow the product Safety Data Sheet (SDS). Use this product only as directed. Keep out of the reach of children.

Warranty

The data, statements, and recommendations set forth in this product information sheet are based on testing, research, and other development work carefully conducted by us, and we believe such data, statements, and recommendations will serve as reliable guidelines. However, this product is subject to numerable uses under varying conditions over which we have no control, and accordingly, we do NOT warrant this product is suitable for any particular use. Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular use or uses. All products manufactured by us are warranted to be first-class material and free from defects in material and workmanship. Liability under this warranty is limited to the net purchase price of any such products proven defective, or, at our option, to the repair or replacement of said products upon their return to us (transportation prepaid).